mzs>EN
mzs>ENable
mzs#con
mzs#conf
Configuring from terminal, memory, or network [terminal]? no
?Must be "terminal", "memory" or "network"
mzs#conf
Configuring from terminal, memory, or network [terminal]?
Enter configuration commands, one per line. End with CNTL/Z.
mzs(config)#ip route 192.168.1.0 255.255.255.0 10.0.0.2
mzs(config)#ip route 192.168.2.0 255.255.255.0 10.0.0.2
mzs(config)#ex
mzs(config)#exit
mzs#
%SYS-5-CONFIG_I: Configured from console by console
mzs#show ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default, U - per-user static route, o - ODR
P - periodic downloaded static route
Gateway of last resort is not set
10.0.0.0/24 is subnetted, 1 subnets
C 10.0.0.0 is directly connected, Serial0/3/0
S 192.168.1.0/24 [1/0] via 10.0.0.2
S 192.168.2.0/24 [1/0] via 10.0.0.2
C 192.168.3.0/24 is directly connected, FastEthernet0/0
mzs#